Our new Ford Flex

There was a time when we horse-traded cars all the time, cars would come and go so quickly we’ve forgotten we owned some of them! But recently we have settled down and lived with a few cars that we really liked
Dave’s 1993 Dodge Stealth
1-DSC_0595
My never-ending Mustang Project (Immobile since 2005 – and still NOT going strong!)
DSC_0001
Mr Miata (1990)
2013-07-21 20.24.29
And the mighty 1995 Van – which has done a mighty good job pulling the Airstream since we bought it in 2003, and has also set a record for length of stay. I don’t think we’ve ever owned a car for 10 years straight without once having even thought of getting rid of it.
DSC_0036

Unfortunately, all our functional cars have something in common – the newest one is a 1995 – and it’s 2013! The Stealth is coming up on some major maintenance that will probably cost more than the car is worth. So we decided it was time to replace the Stealth. My priorities were something that could handle gravel roads for getting to the trailheads for all the hiking I’d like to start doing, and something with 4 doors that would make it easier to load the dogs. Dave’s priority was something cool with lots of horsepower.
As we started shopping, it appeared that anything we got with the ground clearance and passenger capacity we wanted would be pretty big – almost big enough to pull the trailer. I spent months fussing over towing capacities and reviews of towing performance on the crossovers we were test driving. I wasn’t very happy with any of them. Seemed like if we just went a little bit bigger we could replace the Stealth and the Van with one car.
Then this showed up on the internet search at a Ford dealership in Portland.

1-DSC_0050.NEF

It’s a Ford Flex! Silver with a black leather interior, and even with 68k miles on it, it just about looks perfect from end to end. We couldn’t have asked for a nicer car. We had already been to test drive a 2013 with 15k on it (it was a former rental car) and liked how it drove, but the $26k price tag was too rich for us. Then we saw this 2009 on a local ford lot, and it was $17.5k, which was much better. We only needed to get them to knock off the 500 to get down to $17, and we felt it was a fair price, especially compared to the other ones available. The carfax was clean, and showed it spent one year as a rental, and then the next three years with a family in Vancouver, so it was a local trade in. It also isn’t loaded down with goodies we don’t need (though it’s still plenty loaded compared to the cars we are coming from). The sales guy knew nothing about it, told us all sorts of stuff that was wrong, didn’t know how big the engine was, said it had 7500# tow capacity (it will have 4500# capacity after adding an oil cooler)! Luckily we had done our research and already knew all the info we needed.

1-DSC_0057
Check out that cushy black leather interior!

The only problem we had was that we had gotten pre-approved from our credit union, and wanted the dealer to just give us a purchase order, and we would go get the check and come back with it the next day. But 1) they want the sale closed NOW so you can’t change your mind, and 2) they want the financing to go through them, so even if they get the financing through your credit union, they will get some kickback. However, we didn’t want them running credit check on us – it wasn’t necessary. So Dave steadfastly refused to fill out a credit app, and they just would not give up. It literally took an hour to get them to relent and send us home with a purchase order. They said, oh we can’t hold the car for you (that’s ok, we’ll risk it), we can’t take a deposit, it’s against the law (really? I find that hard to believe), Here, you tell us the info and we’ll fill it out for you (you’re really not getting the point). Finally, FINALLY, they decided to give us the purchase order and let us go. So they brought out a blank purchase order and said ‘here you go, sign this’, and we were like, we can’t sign this, it has no info on it! I don’t sign blank contracts! They said, it’s ok, we’ll print everything on it later. We said fine, go print it on it NOW, we’ll wait. So they went away and then came back and said they couldn’t do that, so they made the salesguy write it out by hand – I think it was just to make it as painful as possible for not filing out their credit app!

1-DSC_0055.NEF
I love the ‘ribs’ on the sides and back, giving it that retro station wagon look! (This picture was taken after we got the hitch installed)

The next morning at the bank we found the guy had totally screwed up the VIN, but luckily we could pull it up off their webpage and got all the bank paperwork filled out. Columbia Credit Union was great to deal with, didn’t try to push anything on us, helped us figure out the best payment, got 5 years and well under $300 a month, so I was happy. Took the check back to the car dealers where they made us awkwardly sit around and make small talk for about a half hour with the sales guy, then finally went in with the finance guy. So we have a purchase order, a check, and printed instructions on where to send the title to the Credit Union. By the time we get to the finance guy he has lost the piece telling him where to send the title! Then he starts asking us about our credit score to see if he can get us a better rate (again, no thank you, and our credit score is none of your business), and THEN tries to sell us on ‘gap insurance’ and a warranty!

Finally – about 2 hours later – we drive off with our new car. Salesguy offers to help us setup the bluetooth, and we say no thanks, I’m eager to get back to work, and we finally drive it home – yay! Later, when our friends are helping us try to set it up, it turns out, the car doesn’t even have Bluetooth! I swear that kid didn’t get a damn thing right about the car!
The final insult, on our way out the door they hand us ONE key – sorry, that’s all they have. We should have argued the point (or found this out earlier in the negotiations), but since we are coming from 1990’s vintage cars we had no idea that the key has a chip imbedded in it and needs to be programmed. If you have two keys you can program a third, but if you only have one, you have to let the dealer program it, and it costs about $150!!! Let me put a few more exclamation points on that – $150 FOR A KEY!!!!!!!! What a flipping rip off!
It’s such a shame that to get the car you want, sometimes you have to deal with car dealers because they really put such a massive amount of ‘suck’ into the whole experience.

But none of that matters, I shall put it all behind me (except for remembering to never, NEVER go anywhere near that dealership again), because we already LOVE our Flex! It drives so nice, it has good power, it’s smooth, it’s so quiet you can easily talk in it. Last night we went to a play about 45 minutes away, and took our friends, and the backseat was comfortable and we chatted the whole way. I even took my whole department to lunch and fit everyone in it – with two adults in the third row – they said it was reasonably comfortable! I can plug in my ipod and listen to Christmas music 🙂 It’s just awesome.

1-DSC_0600

1-DSC_0601

It’s a little bit shorter than the van, both in length and height. Since it did not come with a factory tow package,we had our tire guys install a Reese tow hitch, now we just need an oil cooler and then it will tow 4500#, plenty for our 3000# trailer. And look at all this room in the back for hauling stuff – and that’s with the backseat still up!

1-DSC_0059

Oh, and all-wheel drive, so it shouldn’t get stuck on wet grass like the van used to. Can’t wait to get that all setup and try it in the spring! I think the silver Flex and the silver Airstream are going to look great together!

1-DSC_0056

The worst part is that after finding this awesome Flex to replace the van, we have decided the van is just too useful to get rid of yet, so we’re keeping it – for now anyway. There’s no way I would let anyone put plywood or gardening supplies in the back of my beautiful Flex!

_

Mr Miata’s red interior

Ever since I saw a 1993 Limited Edition Miata on the lot in ’93 when I was shopping for my first Miata, and had to pass on it because it was out of my price range, I have wanted a black Miata with a red interior. Well, all these years later now I finally have a black Miata, so it’s time to get to work on that red interior.

Step One: door panels. This isn’t too hard, and I actually did this to my last red Miata. It starts with about $30 of red vinyl from the fabric store.
I had picked up a couple extra door panels from the junkyard when I bought the used top. To cover them in the red vinyl just requires a glue gun and a lot of patience.

I leave the original vinyl on, and use it as a pattern to follow the curves. Plus it has padding on it, so it looks nice when it is done. The extra thickness isn’t noticeable.

Here is the driver’s side ready to be installed.

And here is how the passenger side looks in the car. It has a few wrinkles but those should disappear as the material relaxes. I left the trim, including the speaker covers, black.
For my next trick, I plan to replace the shift boot with a red one, and paint the console and radio surround red, though I may have to wait for warmer weather for painting.

A little spit & polish

Well, just polish, actually. And a good wash.

I drove Mr Miata to work today, and he’s quite the rattle-trap right now, with no carpet on the backshelf, and no console. I can actually look through the shifter hole and see the ground going by under us! But I’m waiting on a box of parts to fix all that, new rubber shift boots for the shifter, and then I can finish putting it all back together.

The wash this afternoon gave me a chance to see where some leaks were and tighten up the bolts around the drain that goes around the bottom of the top. Then in the evening I spent a little quality time with him polishing up the back window with Novus plastic polish. Looks pretty good for something that came out of a junkyard!

_

Blowing my top!

 

So Mr Miata came with a little problem in the ‘top’ department – it was torn and useless at it’s primary function – keeping the interior dry. A new top costs a couple hundred plus installation, and a used hardtop runs about a grand. I needed to find a cheaper solution.

 

image001

Luckily I found a junkyard Miata with a good top. So I handed over $150 in hopes of ending up with a Miata I could actually drive in the winter. Winter is far too long to go without driving a Miata if there’s one available! While I was there I also scored a number of other nice parts, like good doorpanels (Mr Miata has had most of the fasteners broken on his doorpanels), M Edition sill plates from the 94 M Edition parked behind the red miata, and some other bits and pieces.

 

IMG_0387

I clamped up my torn back window and got to work. Mighty is assisting by keeping the top from blowing away Winking smile

 

IMG_0389

Step 2, remove the seats so there is room to work in that tiny little car.

 

IMG_0388

Remove the carpeting and try not to panic as it tears apart in your hands…turned out 23 year old carpeting gets a little dry-rotted after all those years in the sun.

 

IMG_0392

A few more trim pieces, a few bolts, and tah-dah – topless!

 

IMG_0394

Lesson one – even on a tiny car, tops are significantly bigger and heavier than you might expect! Plus that frame makes this the finger-pinchiest repair job I’ve ever taken on!

 

IMG_0397

The new top goes on (Dave had to help me wrestle it into place), and Mighty is happy to resume her top-holding-down duties

 

IMG_0399

It’s not perfect, there’s a little loose seam on the driver’s side.

 

IMG_0402

And a little wear on the passenger side. But it kept the junkyard car nice and dry, so I think it should last the winter for me.

 

IMG_0398

Dang, I managed not to pinch my fingers in the frame, but the metal on the rear shelf got me while fastening down the top. No job is complete until you bleed and swear. This job was definitely done!

 

IMG_0395

One thing that was very different from previous car projects – bringing the ipad out to the garage to both play music through a little portable speaker, and act as instant reference material. I did most of this job with the help of documents and advice from Miata.net.

 

 IMG_0406

All done, top looks tight at all the seams, just needs a wash to get rid of the junkyard dirt. I’ll just have to drive it in the rain to see if it’s water tight.

 

 

_

A day at the Ren Faire

 

Went with some friends to the Renaissance Faire in HIllsboro, OR. It was an unfortunate choice of days, because we had a big storm blowing through, with rain coming down hard and the wind whipping the tents around. The birds of prey show got cancelled, but they did a little fly around and then stood around to talk to the small crowd braving the weather. These are the folks from Sky Kings Falconry.

 

DSC_0001

DSC_0002

DSC_0003

DSC_0004

 

After that came jousting, but again, the weather turned ugly and they finished the show up early, and I don’t think they were going to get to do any more demonstrations during the day. The weather was just insane. Glad we got a bit of clearance to see this much.

 

DSC_0005

DSC_0013

DSC_0049

DSC_0050

 

They made several passes, but the rain started up again, and the guy on the white horse took a dive and they quickly cleared the arena.

 

DSC_0071

DSC_0073

DSC_0074

 

The rest of the time we wandered around and saw some magic, some comedy, and a very funny sword swallower named Tom Silectomy who had to cut out the fire portions of his show because of the intense wind. We also had a variety of treats on a stick (apparently everything is better on a stick), and were harangued by people in costume at every turn. So good food, good friends, and good entertainment, making up for the ridiculously blustery weather. Oh well, the grey skies and wind-nipped extremities made it feel just like jolly old England!

_

Making Prunes

 

Our house came with a plum tree

DSC_0037

We didn’t know what kind of fruit tree it was until plums started falling off, and the dogs were eating them.

DSC_0031

DSC_0035

They were very tasty, but more plums all at once than the three of us could eat (me and the dogs, Dave’s not interested in plums)

So I dug out the dehydrator

DSC_0038-001

A bucket of plums turned into four trays of plum-halves.

About 15 hours later, I had prunes.

DSC_0002

They are super sweet!

DSC_0001

I went ahead and froze them to ensure they will not mold. I thought I had them dry enough, but not enough to trust putting them in the cupboard. Even though they are taking up a little freezer space, they take up a lot less space dehydrated than they would if I’d just frozen them fresh.

_